PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H5065
H5065 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The CONE,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CORROSION RESISTING, seat_angle: 45.0 DEGREES NOMINAL, thread_class: 3A ALL ENDS A, overall_height: 0.907 INCHES NOMINAL IN, overall_length: 0.620 INCHES NOMINAL IN, shank_diameter: 0.615 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-163-0645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5065
NSN: 4820-01-163-0645
FSC: 4820
CAGE: 54716 — HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
seat_angle45.0 DEGREES NOMINAL
thread_class3A ALL ENDS A
overall_height0.907 INCHES NOMINAL IN
overall_length0.620 INCHES NOMINAL IN
shank_diameter0.615 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL BOSS ALL ENDS
flange_diameter1.060 INCHES NOMINAL IN
inside_diameter0.732 INCHES NOMINAL IN
connection_styleEXTERNAL SEAT FOR GASKET SEAL (BOSS) ALL ENDS
outside_diameter1.836 INCHES NOMINAL IN
special_featuresSEAT WITH INTEGRAL GLAND
NSN4820-01-163-0645
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: H5065 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND ALL ENDS
•
THREAD CLASS: 3A ALL ENDS A
•
CONNECTION STYLE: EXTERNAL SEAT FOR GASKET SEAL (BOSS) ALL ENDS
•
FLOW CONTROL DEVICE: DISK
•
THREAD QUANTITY PER INCH: 12 ALL ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 303 ASSN STD SINGLE MATERIAL RESPONSE BODY
•
CONNECTION TYPE: THREADED EXTERNAL BOSS ALL ENDS
•
VALVE OPERATION METHOD: AUTOMATIC
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND ALL ENDS
THREAD CLASS3A ALL ENDS A
CONNECTION STYLEEXTERNAL SEAT FOR GASKET SEAL (BOSS) ALL ENDS
FLOW CONTROL DEVICEDISK
THREAD QUANTITY PER INCH12 ALL ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 303 ASSN STD SINGLE MATERIAL RESPONSE BODY
CONNECTION TYPETHREADED EXTERNAL BOSS ALL ENDS
VALVE OPERATION METHODAUTOMATIC
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 416 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
MATERIALSTEEL COMP 416 FLOW CONTROL DEVICE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
H-5065-7-PL1362Interchangeable
interchangeable cross-reference
interchangeable
H-5065Interchangeable
interchangeable cross-reference
interchangeable
H5065-ASSY-2-PL1357Interchangeable
interchangeable cross-reference
interchangeable
050842Interchangeable
interchangeable cross-reference
interchangeable
H-5065 PIECE 4-050862Interchangeable
interchangeable cross-reference
interchangeable
050862Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H5065?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5065?
H5065 is a CONE,TAPERED ROLLER BEARING.
What parts can replace H5065?
There are 18 known substitutes for H5065: H-5065-7-PL1362, H-5065, H5065-ASSY-2-PL1357 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H5065?
H5065 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-163-0645. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5065

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026