PartsTable
Technical Data Sheet
Download PDF

H5-15-4513-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H5-15-4513-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, hole_diameter: 0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN, overall_length: 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN, hardness_rating: 50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-228-6945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5-15-4513-1
NSN: 5330-00-228-6945
FSC: 5330 — Packing and Gasket Materials
CAGE: 24384 — SYPRIS ELECTRONICS, LLC DBA SYPRIS ELECTRONICS LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
hole_diameter0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
overall_length1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
hardness_rating50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
cross-sectional_thickness0.030 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-228-6945
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H5-15-4513-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.030 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
APERTURE DIAMETER1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
326015150Reference document
Same NSN cross-reference
Reference document — Secondary reference
Z8-282Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H5-15-4513-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5-15-4513-1?
H5-15-4513-1 is a GASKET.
What parts can replace H5-15-4513-1?
There are 2 known substitutes for H5-15-4513-1: 326015150, Z8-282. Substitute compatibility should be verified for your specific system.
What is the NSN for H5-15-4513-1?
H5-15-4513-1 is cataloged in the U.S. Government catalog under NSN 5330-00-228-6945. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5-15-4513-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.