PartsTable
Technical Data Sheet
Download PDF

H5-15-4357-1 — LOOP,STRAP FASTENER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H5-15-4357-1: LOOP,STRAP FASTENER.

The LOOP,STRAP FASTENER is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, inside_width: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, hole_diameter: 0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN, inside_length: 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN, overall_length: 1.780 INCHES NOMINAL IN, painted_feature: INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-441-8669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5-15-4357-1
NSN: 5340-00-441-8669
FSC: 5340 — Hardware, Commercial
CAGE: 24384 — SYPRIS ELECTRONICS, LLC DBA SYPRIS ELECTRONICS LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
inside_width0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
hole_diameter0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
inside_length1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
overall_length1.780 INCHES NOMINAL IN
painted_featureINCLUDED
style_designatorOFFSET
surface_treatmentANODIZE
NSN5340-00-441-8669
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H5-15-4357-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
INSIDE LENGTH: 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET
•
PAINTED FEATURE: INCLUDED
•
COLOR: OLIVE DRAB
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL: ALUMINUM ALLOY 5052
TECHNICAL CHARACTERISTICS
INSIDE WIDTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
INSIDE LENGTH1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET
OVERALL LENGTH1.780 INCHES NOMINAL IN
PAINTED FEATUREINCLUDED
COLOROLIVE DRAB
SURFACE TREATMENTANODIZE
MATERIALALUMINUM ALLOY 5052
HOLE DIAMETER0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
326015148Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H5-15-4357-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5-15-4357-1?
H5-15-4357-1 is a LOOP,STRAP FASTENER.
What parts can replace H5-15-4357-1?
There is 1 known substitute for H5-15-4357-1: 326015148. Substitute compatibility should be verified for your specific system.
What is the NSN for H5-15-4357-1?
H5-15-4357-1 is cataloged in the U.S. Government catalog under NSN 5340-00-441-8669. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5-15-4357-1