PartsTable
Technical Data Sheet
Download PDF

H49478-4 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H49478-4: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.328 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-134-0745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H49478-4
NSN: 5310-01-134-0745
NIINs: 011340745, 011350117
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.328 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating33.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
width_across_flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED
NSN5310-01-134-0745
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H49478-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.285 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.285 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
THREAD CLASS3B
THREAD QUANTITY PER INCH28
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
4026549Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy H49478-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H49478-4?
H49478-4 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace H49478-4?
There is 1 known substitute for H49478-4: 4026549. Substitute compatibility should be verified for your specific system.
What is the NSN for H49478-4?
H49478-4 is cataloged in the U.S. Government catalog under NSN 5310-01-134-0745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H49478-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.