PartsTable
Technical Data Sheet
Download PDF

H462-0412-17 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H462-0412-17: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, nut_style: SLEEVE, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: HOT FINISHED, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-493-6868, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H462-0412-17
NSN: 5310-01-493-6868
FSC: 5310 — Nuts and Washers
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400 OVERALL
nut_styleSLEEVE
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresHOT FINISHED
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
end_item_identificationDOOR ASSY, LOS ANGELES CLASS SSN (688)
thread_quantity_per_inch20
flange_width_across_flats0.425 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
material_document_and_classificationQQ-281-N,CL,A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-493-6868
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H462-0412-17 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.425 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-281-N,CL,A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT STYLE: SLEEVE
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.425 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-281-N,CL,A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SPECIAL FEATURESHOT FINISHED
NUT STYLESLEEVE
THREAD CLASS2B
END ITEM IDENTIFICATIONDOOR ASSY, LOS ANGELES CLASS SSN (688)
THREAD QUANTITY PER INCH20
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H462-0412-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H462-0412-17?
H462-0412-17 is a NUT,SLEEVE.
What is the NSN for H462-0412-17?
H462-0412-17 is cataloged in the U.S. Government catalog under NSN 5310-01-493-6868. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H462-0412-17