PartsTable
Technical Data Sheet
Download PDF

H45112-3-2034-F03 — RUBBER ROUND SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H45112-3-2034-F03: RUBBER ROUND SECTION.

The RUBBER ROUND SECTION is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR LOCATION NOT OTHERWISE SPECIFIED, end_item_identification: GA OF 024.5 IN SHAFT TYPE MX9 WATER LUB;IN BOARD SEAL USED ON LHD-1 CLASS SHIPS IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-477-8758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H45112-3-2034-F03
NSN: 5330-01-477-8758
FSC: 5330 — Packing and Gasket Materials
CAGE: 0EYA6 — DEFENSE MARITIME SOLUTIONS, INC. (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR LOCATION NOT OTHERWISE SPECIFIED
end_item_identificationGA OF 024.5 IN SHAFT TYPE MX9 WATER LUB;IN BOARD SEAL USED ON LHD-1 CLASS SHIPS IN
NSN5330-01-477-8758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H45112-3-2034-F03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
END ITEM IDENTIFICATIONGA OF 024.5 IN SHAFT TYPE MX9 WATER LUB;IN BOARD SEAL USED ON LHD-1 CLASS SHIPS IN
MATERIALRUBBER CHLOROPRENE CLASS CR LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 2
US70567Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
H70567/6/5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy H45112-3-2034-F03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H45112-3-2034-F03?
H45112-3-2034-F03 is a RUBBER ROUND SECTION.
What parts can replace H45112-3-2034-F03?
There are 2 known substitutes for H45112-3-2034-F03: US70567, H70567/6/5. Substitute compatibility should be verified for your specific system.
What is the NSN for H45112-3-2034-F03?
H45112-3-2034-F03 is cataloged in the U.S. Government catalog under NSN 5330-01-477-8758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H45112-3-2034-F03