PartsTable
Technical Data Sheet
Download PDF

H434-0241-134 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

H434-0241-134: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include thread_class: 3A A, fastener_length: 0.500 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, nominal_thread_diameter: 0.250 INCHES IN, thread_quantity_per_inch: 20, thread_series_designator: UNRC. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-676-4216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H434-0241-134
NSN: 5305-01-676-4216
FSC: 5305 — Screws
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
thread_class3A A
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
thread_series_designatorUNRC
NSN5305-01-676-4216
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: H434-0241-134 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES DESIGNATOR: UNRC
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A A
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNRC
SUBSTITUTES & CROSS-REFERENCES 2
92-05-1050AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
0.250-20UNRC-3AX.0.500LG NICUReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H434-0241-134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H434-0241-134?
H434-0241-134 is a SCREW,CAP,SOCKET HEAD.
What parts can replace H434-0241-134?
There are 2 known substitutes for H434-0241-134: 92-05-1050A, 0.250-20UNRC-3AX.0.500LG NICU. Substitute compatibility should be verified for your specific system.
What is the NSN for H434-0241-134?
H434-0241-134 is cataloged in the U.S. Government catalog under NSN 5305-01-676-4216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H434-0241-134