PartsTable
Technical Data Sheet
Download PDF

H4276XG0 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H4276XG0: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 11.125 INCHES NOMINAL IN, special_features: THREE BOLT HOLES 0.375 IN. DIA IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-987-6336, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H4276XG0
NSN: 5330-00-987-6336
FSC: 5330 — Packing and Gasket Materials
CAGE: 42280 — GARDNER DENVER NASH LLC DBA GARDNER DENVER ENGINEERED PRODUCTS GROUP DIV GARDNER DENVER NASH (USA)
SPECIFICATIONS
hole_diameter0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter11.125 INCHES NOMINAL IN
special_featuresTHREE BOLT HOLES 0.375 IN. DIA IN
bolt_hole_quantity6
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-00-987-6336
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H4276XG0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 11.125 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
•
HOLE DIAMETER: 0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER11.125 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
SPECIAL FEATURESTHREE BOLT HOLES 0.375 IN. DIA IN
HOLE DIAMETER0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
H4276Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H4276XG0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H4276XG0?
H4276XG0 is a GASKET.
What parts can replace H4276XG0?
There is 1 known substitute for H4276XG0: H4276. Substitute compatibility should be verified for your specific system.
What is the NSN for H4276XG0?
H4276XG0 is cataloged in the U.S. Government catalog under NSN 5330-00-987-6336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H4276XG0