PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H42512
H42512 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: RUBBER CHLOROPRENE CLASS CR TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.750 INCHES NOMINAL IN, outside_diameter: 1.156 INCHES NOMINAL IN, operating_pressure: 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 9000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-313-8690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H42512
NSN: 4720-01-313-8690
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.750 INCHES NOMINAL IN
outside_diameter1.156 INCHES NOMINAL IN
operating_pressure2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
minimum_inside_bending_radius9.500 INCHES IN
layer_composition_and_location1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
NSN4720-01-313-8690
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: H42512 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR TUBE
•
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 1.156 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEROUND
MATERIALRUBBER CHLOROPRENE CLASS CR TUBE
BURST TEST PRESSURE9000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER1.156 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS9.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
OPERATING PRESSURE2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10B29662Interchangeable
interchangeable cross-reference
interchangeable
A079029662Interchangeable
interchangeable cross-reference
interchangeable
50A64Interchangeable
interchangeable cross-reference
interchangeable
A10212Interchangeable
interchangeable cross-reference
interchangeable
201010043Interchangeable
interchangeable cross-reference
interchangeable
1005PL0902380Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H42512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H42512?
H42512 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace H42512?
There are 9 known substitutes for H42512: 10B29662, A079029662, 50A64 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H42512?
H42512 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-313-8690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H42512

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026