PartsTable
Technical Data Sheet
Download PDF

H4-18 — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

H4-18: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A FIRST END A, head_diameter: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.372 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, shoulder_shape: ROUND FIRST SHOULDER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H4-18
NSN: 3110-00-100-0375
NIINs: 001000375, 005146543, 009468299
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 13125 — CLEVELAND TRENCHER CO INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A FIRST END A
head_diameter0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.372 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
shoulder_shapeROUND FIRST SHOULDER
connection_typeUNTHREADED EXTERNAL TUBE SECOND END
fastener_length1.507 INCHES MINIMUM AND 1.553 INCHES MAXIMUM IN
shoulder_length1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM FIRST SHOULDER IN
connection_stylePLAIN (TUBE) FIRST END
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND FIRST END
NSN3110-00-100-0375
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H4-18 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
SUBSTITUTES & CROSS-REFERENCES 9
15943JReference document
Same NSN cross-reference
Reference document — Secondary reference
706760Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3525Reference document
Same NSN cross-reference
Reference document — Secondary reference
MA1623Reference document
Same NSN cross-reference
Reference document — Secondary reference
581584Reference document
Same NSN cross-reference
Reference document — Secondary reference
R7355Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H4-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H4-18?
H4-18 is a CUP,TAPERED ROLLER BEARING.
What parts can replace H4-18?
There are 9 known substitutes for H4-18: 15943J, 706760, 3525 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H4-18?
H4-18 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0375. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H4-18