PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H38K613
H38K613 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 2.140 INCHES NOMINAL IN, length: 4.775 INCHES NOMINAL IN, material: UNABLE TO DECODE, style_designator: FLUSH LEVER ACTUATOR, features_provided: BOLT, bolt_offset_distance: 0.132 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-072-8315, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H38K613
NSN: 5340-00-072-8315
FSC: 5340
CAGE: 83014 — HARTWELL CORPORATION (USA)
SPECIFICATIONS
width2.140 INCHES NOMINAL IN
length4.775 INCHES NOMINAL IN
materialUNABLE TO DECODE
style_designatorFLUSH LEVER ACTUATOR
features_providedBOLT
bolt_offset_distance0.132 INCHES NOMINAL IN
lever_offset_distance0.032 INCHES NOMINAL IN
mounting_hole_diameter0.159 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width1.500 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length1.360 INCHES NOMINAL IN
NSN5340-00-072-8315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H38K613 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 4.775 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.360 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.500 INCHES NOMINAL IN
•
WIDTH: 2.140 INCHES NOMINAL IN
•
BOLT OFFSET DISTANCE: 0.132 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.159 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH4.775 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.360 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.500 INCHES NOMINAL IN
WIDTH2.140 INCHES NOMINAL IN
BOLT OFFSET DISTANCE0.132 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.159 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
FEATURES PROVIDEDBOLT
LEVER OFFSET DISTANCE0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MS19059-2422Interchangeable
interchangeable cross-reference
interchangeable
A9314Interchangeable
interchangeable cross-reference
interchangeable
H-28450 PIECE 1Interchangeable
interchangeable cross-reference
interchangeable
ND6282PC69Interchangeable
interchangeable cross-reference
interchangeable
69ND6282Interchangeable
interchangeable cross-reference
interchangeable
NAS1715C10KInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy H38K613?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H38K613?
H38K613 is a CATCH,FLUSH.
What parts can replace H38K613?
There are 11 known substitutes for H38K613: MS19059-2422, A9314, H-28450 PIECE 1 and 8 more. Substitute compatibility should be verified for your specific system.
Is H38K613 still available?
H38K613 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H38K613

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026