PartsTable
Technical Data Sheet
Download PDF

H341-3001 PART 7 — BOLT,INTERNAL WRENCHING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

H341-3001 PART 7: BOLT,INTERNAL WRENCHING.

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, head_style: FLAT FILLISTER, head_height: 2.000 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 3.000 INCHES NOMINAL IN, thread_length: 2.600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-493-7438, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H341-3001 PART 7
NSN: 5306-01-493-7438
FSC: 5306 — Bolts
CAGE: 90699 — UNIMASCO INC (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
head_styleFLAT FILLISTER
head_height2.000 INCHES NOMINAL IN
thread_class2A A
head_diameter3.000 INCHES NOMINAL IN
thread_length2.600 INCHES NOMINAL IN
fastener_length8.100 INCHES NOMINAL IN
locking_featurePATCH OR PELLET OR STRIP THREADS
thread_directionRIGHT-HAND
width_across_flats1.500 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
end_item_identificationROD ASSEMBLY, CON
NSN5306-01-493-7438
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: H341-3001 PART 7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.500 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
•
HEAD HEIGHT: 2.000 INCHES NOMINAL IN
•
FASTENER LENGTH: 8.100 INCHES NOMINAL IN
•
THREAD LENGTH: 2.600 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 1.750 INCHES IN
•
HEAD STYLE: FLAT FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.500 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
HEAD HEIGHT2.000 INCHES NOMINAL IN
FASTENER LENGTH8.100 INCHES NOMINAL IN
THREAD LENGTH2.600 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER1.750 INCHES IN
HEAD STYLEFLAT FILLISTER
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H341-3001 PART 7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H341-3001 PART 7?
H341-3001 PART 7 is a BOLT,INTERNAL WRENCHING.
What is the NSN for H341-3001 PART 7?
H341-3001 PART 7 is cataloged in the U.S. Government catalog under NSN 5306-01-493-7438. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H341-3001 PART 7