PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H3407-501
H3407-501 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include width: 1.7500 INCHES NOMINAL1.7500 INCHES NOMINAL IN, length: 7.4400 INCHES NOMINAL7.4400 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.1760 INCHES MINIMUM AND 0.1760 INCHES MINIMUM AND 0.1820 INCHES MAXIMUM0.1820 INCHES MAXIMUM IN, overall_height: 3.5400 INCHES NOMINAL3.5400 INCHES NOMINAL IN, style_designator: RECTANGULAR SWIVEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-301-3229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H3407-501
NSN: 5340-01-301-3229
FSC: 5340
CAGE: 83014 — HARTWELL CORPORATION (USA)
SPECIFICATIONS
width1.7500 INCHES NOMINAL1.7500 INCHES NOMINAL IN
length7.4400 INCHES NOMINAL7.4400 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.1760 INCHES MINIMUM AND 0.1760 INCHES MINIMUM AND 0.1820 INCHES MAXIMUM0.1820 INCHES MAXIMUM IN
overall_height3.5400 INCHES NOMINAL3.5400 INCHES NOMINAL IN
style_designatorRECTANGULAR SWIVEL
NSN5340-01-301-3229
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H3407-501 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 1.7500 INCHES NOMINAL1.7500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5358 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-T-8504 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: RECTANGULAR SWIVEL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
LENGTH: 7.4400 INCHES NOMINAL7.4400 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.1760 INCHES MINIMUM AND 0.1760 INCHES MINIMUM AND 0.1820 INCHES MAXIMUM0.1820 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH1.7500 INCHES NOMINAL1.7500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5358 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-T-8504 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORRECTANGULAR SWIVEL
MATERIALSTEEL CORROSION RESISTING OVERALL
LENGTH7.4400 INCHES NOMINAL7.4400 INCHES NOMINAL IN
HOLE DIAMETER0.1760 INCHES MINIMUM AND 0.1760 INCHES MINIMUM AND 0.1820 INCHES MAXIMUM0.1820 INCHES MAXIMUM IN
OVERALL HEIGHT3.5400 INCHES NOMINAL3.5400 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
80-4-8GInterchangeable
interchangeable cross-reference
interchangeable
9750Interchangeable
interchangeable cross-reference
interchangeable
9159AACInterchangeable
interchangeable cross-reference
interchangeable
9159AAInterchangeable
interchangeable cross-reference
interchangeable
105589-02Interchangeable
interchangeable cross-reference
interchangeable
975UInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H3407-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H3407-501?
H3407-501 is a HANDLE,BAIL.
What parts can replace H3407-501?
There are 17 known substitutes for H3407-501: 80-4-8G, 9750, 9159AAC and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H3407-501?
H3407-501 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-301-3229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H3407-501

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026