PartsTable
Technical Data Sheet
Download PDF

H3156344PC13 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H3156344PC13: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: CARBON OVERALL, special_features: THREE PIECE CONSTRUCTION, style_designator: CIRCULAR, aperture_diameter: 6.000 INCHES NOMINAL IN, cross-sectional_width: 0.645 INCHES NOMINAL IN, cross-sectional_height: 0.472 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-343-9748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H3156344PC13
NSN: 5330-00-343-9748
FSC: 5330 — Packing and Gasket Materials
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialCARBON OVERALL
special_featuresTHREE PIECE CONSTRUCTION
style_designatorCIRCULAR
aperture_diameter6.000 INCHES NOMINAL IN
cross-sectional_width0.645 INCHES NOMINAL IN
cross-sectional_height0.472 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-343-9748
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H3156344PC13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.472 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.645 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
APERTURE DIAMETER: 6.000 INCHES NOMINAL IN
•
MATERIAL: CARBON OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.472 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.645 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESPECIAL
APERTURE DIAMETER6.000 INCHES NOMINAL IN
SPECIAL FEATURESTHREE PIECE CONSTRUCTION
MATERIALCARBON OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
1JH1424PC13Reference document
Same NSN cross-reference
Reference document — Secondary reference
1505670Reference document
Same NSN cross-reference
Reference document — Secondary reference
1JH3233PC13Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H3156344PC13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H3156344PC13?
H3156344PC13 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace H3156344PC13?
There are 3 known substitutes for H3156344PC13: 1JH1424PC13, 1505670, 1JH3233PC13. Substitute compatibility should be verified for your specific system.
What is the NSN for H3156344PC13?
H3156344PC13 is cataloged in the U.S. Government catalog under NSN 5330-00-343-9748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H3156344PC13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.