PartsTable
Technical Data Sheet
Download PDF

H313523-5 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H313523-5: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include special_features: 55 DUROMETER EPDM EXTRUSION PER PARKER SEAL, P/N B-017-X-E7100; INSIDE DIAMETER MAX 13.67 INCHES AND MIN 13.57 INCHES IN, center_hole_diameter: 0.162 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN, end_item_identification: NSN 5895-01-435-0571 TERMINAL, SATELLITE COMMUNICATION, part_name_assigned_by_controlling_agency: SEAL,O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-577-9534, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H313523-5
NSN: 5331-01-577-9534
FSC: 5331 — O-ring
CAGE: 60363 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
special_features55 DUROMETER EPDM EXTRUSION PER PARKER SEAL, P/N B-017-X-E7100; INSIDE DIAMETER MAX 13.67 INCHES AND MIN 13.57 INCHES IN
center_hole_diameter0.162 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
end_item_identificationNSN 5895-01-435-0571 TERMINAL, SATELLITE COMMUNICATION
part_name_assigned_by_controlling_agencySEAL,O-RING
NSN5331-01-577-9534
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H313523-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.162 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SPECIAL FEATURES55 DUROMETER EPDM EXTRUSION PER PARKER SEAL, P/N B-017-X-E7100; INSIDE DIAMETER MAX 13.67 INCHES AND MIN 13.57 INCHES IN
CENTER HOLE DIAMETER0.162 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL,O-RING
END ITEM IDENTIFICATIONNSN 5895-01-435-0571 TERMINAL, SATELLITE COMMUNICATION
SUBSTITUTES & CROSS-REFERENCES 1
H313523Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H313523-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H313523-5?
H313523-5 is a O-RING.
What parts can replace H313523-5?
There is 1 known substitute for H313523-5: H313523. Substitute compatibility should be verified for your specific system.
What is the NSN for H313523-5?
H313523-5 is cataloged in the U.S. Government catalog under NSN 5331-01-577-9534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H313523-5