PartsTable / COMPONENT / H27698C
H27698C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.563 INCHES NOMINAL IN, overall_length: 12.672 INCHES NOMINAL IN, special_features: TWO BOLT HOLES 0.547 IN. DIA AND ONE BOLT HOLE 0.625 IN.
DIA IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-383-8793, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H27698C
NSN: 5330-00-383-8793 FSC: 5330 CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
material CELLULOSE OVERALL hole_diameter 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 6.563 INCHES NOMINAL IN overall_length 12.672 INCHES NOMINAL IN special_features TWO BOLT HOLES 0.547 IN. DIA AND ONE BOLT HOLE 0.625 IN. DIA IN bolt_hole_quantity 4 cross-sectional_thickness 0.031 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION NSN 5330-00-383-8793
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: H27698C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL: CELLULOSE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION SPECIAL FEATURES TWO BOLT HOLES 0.547 IN. DIA AND ONE BOLT HOLE 0.625 IN. DIA IN HOLE DIAMETER 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN OVERALL LENGTH 12.672 INCHES NOMINAL IN MATERIAL CELLULOSE OVERALL BOLT HOLE QUANTITY 4 OVERALL WIDTH 6.563 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
DDB-M Interchangeable interchangeable cross-reference
interchangeable
2513-M Interchangeable interchangeable cross-reference
interchangeable
07-862778 Interchangeable interchangeable cross-reference
interchangeable
CFR40108 Interchangeable interchangeable cross-reference
interchangeable
41100H10 Interchangeable interchangeable cross-reference
interchangeable
28508 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy H27698C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H27698C?
H27698C is a GASKET.
What parts can replace H27698C?
There are 8 known substitutes for H27698C: DDB-M, 2513-M, 07-862778 and 5 more. Substitute compatibility should be verified for your specific system.
Is H27698C still available?
H27698C is currently cancelled.
Request a Quote — H27698C