PartsTable
Technical Data Sheet
Download PDF

H260B333 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H260B333: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: STEEL INTERNALLY MOLDED-IN REINFORCEMENT, construction: SOLID, overall_length: 3.812 INCHES NOMINAL IN, special_features: ONE TAB OR @SYN RUBBER 1.000 IN. @LG,ATTACHED TO SIDE ON ONE END IN, style_designator: STRIP, fabrication_method: SOLID.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-347-3782, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H260B333
NSN: 5330-00-347-3782
FSC: 5330 — Packing and Gasket Materials
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
materialSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
constructionSOLID
overall_length3.812 INCHES NOMINAL IN
special_featuresONE TAB OR @SYN RUBBER 1.000 IN. @LG,ATTACHED TO SIDE ON ONE END IN
style_designatorSTRIP
fabrication_methodSOLID
cross-sectional_width0.375 INCHES NOMINAL IN
cross-sectional_height0.343 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-00-347-3782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H260B333 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.343 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
CROSS-SECTIONAL SHAPE STYLE: U
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
FABRICATION METHOD: SOLID
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.343 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.375 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
OVERALL LENGTH3.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU
SPECIAL FEATURESONE TAB OR @SYN RUBBER 1.000 IN. @LG,ATTACHED TO SIDE ON ONE END IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
FABRICATION METHODSOLID
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H260B333?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H260B333?
H260B333 is a SEAL,NONMETALLIC STRIP.
What is the NSN for H260B333?
H260B333 is cataloged in the U.S. Government catalog under NSN 5330-00-347-3782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H260B333