PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H26-03
H26-03 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include block_width: 3.000 INCHES NOMINAL IN, design_type: DUPLEX, bore_diameter: 1.5120 INCHES NOMINAL IN, overall_width: 8.750 INCHES NOMINAL IN, alignment_type: RIGID, block_diameter: 14.880 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0544, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H26-03
NSN: 3110-00-157-0544
FSC: 3110
CAGE: 29975 — HPM CORP (USA)
SPECIFICATIONS
block_width3.000 INCHES NOMINAL IN
design_typeDUPLEX
bore_diameter1.5120 INCHES NOMINAL IN
overall_width8.750 INCHES NOMINAL IN
alignment_typeRIGID
block_diameter14.880 INCHES NOMINAL IN
mounting_methodANCHOR PLATE FLANGE
overall_diameter15.000 INCHES NOMINAL IN
bolt_circle_diameter8.000 INCHES NOMINAL IN
fsc_application_dataWHEEL,LANDING GEAR,ACFT
installation_locationLEFT HAND SIDE OR RIGHT HAND SIDE
mounting_hole_diameter0.625 INCHES NOMINAL IN
NSN3110-00-157-0544
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H26-03 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 1.5120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER1.5120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2-603Interchangeable
interchangeable cross-reference
interchangeable
H2-603Interchangeable
interchangeable cross-reference
interchangeable
XD361-8SH2PC3025-5Interchangeable
interchangeable cross-reference
interchangeable
V17351-4Interchangeable
interchangeable cross-reference
interchangeable
4GASKETInterchangeable
interchangeable cross-reference
interchangeable
2-603-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H26-03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H26-03?
H26-03 is a BEARING,ROLLER,NEEDLE.
What parts can replace H26-03?
There are 15 known substitutes for H26-03: 2-603, H2-603, XD361-8SH2PC3025-5 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H26-03?
H26-03 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0544. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H26-03

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026