PartsTable
Technical Data Sheet
Download PDF

H2297-3 — ACCUMULATOR,HYDRAULIC

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

H2297-3: ACCUMULATOR,HYDRAULIC.

The ACCUMULATOR,HYDRAULIC is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-496-4690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H2297-3
NSN: 5305-00-496-4690
NIINs: 004964690, 015585349, 016680490
FSC: 5305 — Screws
CAGE: 31435 — LUCAS AEROSPACE POWER EQUIPMENT CORPORATION (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
thread_length0.500 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationU-2 AIRCRAFT
nominal_thread_diameter0.216 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-496-4690
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: H2297-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.216 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 2
22973Reference document
Same NSN cross-reference
Reference document — Secondary reference
22793Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H2297-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H2297-3?
H2297-3 is a ACCUMULATOR,HYDRAULIC.
What parts can replace H2297-3?
There are 2 known substitutes for H2297-3: 22973, 22793. Substitute compatibility should be verified for your specific system.
What is the NSN for H2297-3?
H2297-3 is cataloged in the U.S. Government catalog under NSN 5305-00-496-4690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H2297-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.