PartsTable
Technical Data Sheet
Download PDF

H20106F001-71 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

H20106F001-71: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_diameter: 1.2500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 2.3125 INCHES NOMINAL IN, outer_ring_width: 2.2500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-021-1554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H20106F001-71
NSN: 3110-01-021-1554
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_diameter1.2500 INCHES NOMINAL IN
seal_quantity2
alignment_typeRIGID
surface_finishGROUND
inner_ring_width2.3125 INCHES NOMINAL IN
outer_ring_width2.2500 INCHES NOMINAL IN
special_featuresCROWNED OD
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter4.0000 INCHES NOMINAL IN
NSN3110-01-021-1554
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H20106F001-71 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 2.2500 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 4.0000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH2.2500 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER4.0000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESCROWNED OD
SEAL QUANTITY2
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
CCYR-4-SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H20106F001-71?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H20106F001-71?
H20106F001-71 is a BEARING,ROLLER,NEEDLE.
What parts can replace H20106F001-71?
There is 1 known substitute for H20106F001-71: CCYR-4-S. Substitute compatibility should be verified for your specific system.
What is the NSN for H20106F001-71?
H20106F001-71 is cataloged in the U.S. Government catalog under NSN 3110-01-021-1554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H20106F001-71

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.