PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H20087N001PC10
H20087N001PC10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

BEARING,ROLLER,RADIAL AND THRUST. Key specifications include body_style: CYLINDRICAL, inclosure_type: ENCASED, overall_length: 0.314 INCHES NOMINAL IN, terminal_length: 0.185 INCHES NOMINAL IN, overall_diameter: 0.118 INCHES NOMINAL IN, terminal_location: CIRCUMFERENCE ON ADJUSTMENT CONTROL END PERPENDICULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-010-2270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H20087N001PC10
NSN: 3110-01-010-2270
FSC: 3110
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL
inclosure_typeENCASED
overall_length0.314 INCHES NOMINAL IN
terminal_length0.185 INCHES NOMINAL IN
overall_diameter0.118 INCHES NOMINAL IN
terminal_locationCIRCUMFERENCE ON ADJUSTMENT CONTROL END PERPENDICULAR
end_item_identification5820-01-145-8503 MONITOR,RADIO F
adjustment_device_torque0.200 INCH-OUNCES MINIMUM AND 2.000 INCH-OUNCES MAXIMUM IN
nonderated_operating_temp-65.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_type_and_quantity1 FLANGE
capacitance_range_in_picofarads+0.6 TO 4.5 SINGLE SECTION
quality_factor_at_25_deg_celsius3000.0
NSN3110-01-010-2270
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H20087N001PC10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
49726Interchangeable
interchangeable cross-reference
interchangeable
70400Interchangeable
interchangeable cross-reference
interchangeable
10570Interchangeable
interchangeable cross-reference
interchangeable
27270Interchangeable
interchangeable cross-reference
interchangeable
226618PT5Interchangeable
interchangeable cross-reference
interchangeable
4006-310113-27270Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H20087N001PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H20087N001PC10?
H20087N001PC10 is a BEARING,ROLLER,RADIAL AND THRUST.
What parts can replace H20087N001PC10?
There are 8 known substitutes for H20087N001PC10: 49726, 70400, 10570 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H20087N001PC10?
H20087N001PC10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-010-2270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H20087N001PC10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026