PartsTable / COMPONENT / H200000B
H200000B — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, housing_bore_diameter: 5.251 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.812 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5330-00-527-9316, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H200000B
NSN: 5330-00-527-9316 FSC: 5330 CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN housing_bore_diameter 5.251 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 3.812 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-527-9316
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: H200000B
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 5.251 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• ACCOMMODATED SHAFT DIAMETER: 3.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN CASE STYLE SQUARE MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 5.251 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT ACCOMMODATED SHAFT DIAMETER 3.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
51718 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
11194 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
L51F Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
0-11194 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
11194A Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
10-2726-1 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED GOVERNMENT REGISTRY
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy H200000B?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H200000B?
H200000B is a SEAL,PLAIN ENCASED.
What parts can replace H200000B?
There are 21 known substitutes for H200000B: 51718, 11194, L51F and 18 more. Substitute compatibility should be verified for your specific system.
Is H200000B still available?
H200000B is currently cancelled.
Request a Quote — H200000B