PartsTable
Technical Data Sheet
Download PDF

H16DW2606-305 — WIRING HARNESS,BRANCHED

✓ Government record, cited
— · WIRE CABLE
PRODUCT OVERVIEW

H16DW2606-305: WIRING HARNESS,BRANCHED.

The WIRING HARNESS,BRANCHED is a the manufacturer industrial component. Key specifications include usage_design: POWER, binding_method: SLEEVE AND TAPED AND WIRE BOUND, termination_type: CONNECTOR SECOND END ALL CONDUCTORS, end_item_identification: F-16C BLOCK 50. This part is cataloged in the U.S.

Government catalog under NSN 6150-01-345-0650, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H16DW2606-305
NSN: 6150-01-345-0650
FSC: 6150 — Miscellaneous Electric Power and Distribution Equipment
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
usage_designPOWER
binding_methodSLEEVE AND TAPED AND WIRE BOUND
special_featuresC/O 1 BACKSHELL; 6 CLAMP; 13 SHIELD; 2 SPLICE; 10 CONNECTOR; 6 PLUG; 2 RECP; A/R TAPE; CONTACT; SLEEVING; SLEEVE; TERMINAL; PLUG
termination_typeCONNECTOR SECOND END ALL CONDUCTORS
end_item_identificationF-16C BLOCK 50
NSN6150-01-345-0650
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: H16DW2606-305 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TERMINATION TYPE: CONNECTOR SECOND END ALL CONDUCTORS
•
USAGE DESIGN: POWER
•
BINDING METHOD: SLEEVE AND TAPED AND WIRE BOUND
TECHNICAL CHARACTERISTICS
TERMINATION TYPECONNECTOR SECOND END ALL CONDUCTORS
TERMINATION TYPECONNECTOR FIRST END ALL CONDUCTORS
USAGE DESIGNPOWER
SPECIAL FEATURESC/O 1 BACKSHELL; 6 CLAMP; 13 SHIELD; 2 SPLICE; 10 CONNECTOR; 6 PLUG; 2 RECP; A/R TAPE; CONTACT; SLEEVING; SLEEVE; TERMINAL; PLUG
END ITEM IDENTIFICATIONF-16C BLOCK 50
BINDING METHODSLEEVE AND TAPED AND WIRE BOUND
SUBSTITUTES & CROSS-REFERENCES 1
H16DW2606Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy H16DW2606-305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H16DW2606-305?
H16DW2606-305 is a WIRING HARNESS,BRANCHED.
What parts can replace H16DW2606-305?
There is 1 known substitute for H16DW2606-305: H16DW2606. Substitute compatibility should be verified for your specific system.
What is the NSN for H16DW2606-305?
H16DW2606-305 is cataloged in the U.S. Government catalog under NSN 6150-01-345-0650. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H16DW2606-305