PartsTable
Technical Data Sheet
Download PDF

H160833 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

H160833: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.5000 INCHES NOMINAL IN, cone_width: 1.9460 INCHES NOMINAL IN, bore_diameter: 4.5000 INCHES NOMINAL IN, overall_width: 2.1250 INCHES NOMINAL IN, standout_width: 0.6250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-5833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H160833
NSN: 3110-00-100-5833
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 42271 — KENOSHA AUTOMOTIVE PLANT SUB OF AMERICAN MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.5000 INCHES NOMINAL IN
cone_width1.9460 INCHES NOMINAL IN
bore_diameter4.5000 INCHES NOMINAL IN
overall_width2.1250 INCHES NOMINAL IN
standout_width0.6250 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, STEEP ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter9.0000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-5833
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H160833 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, STEEP ANGLE
•
OVERALL OUTSIDE DIAMETER: 9.0000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.6250 INCHES NOMINAL IN
•
CONE WIDTH: 1.9460 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.5000 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, STEEP ANGLE
OVERALL WIDTH2.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER9.0000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.6250 INCHES NOMINAL IN
CONE WIDTH1.9460 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER4.5000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
160833Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy H160833?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H160833?
H160833 is a BEARING,ROLLER,TAPERED.
What parts can replace H160833?
There is 1 known substitute for H160833: 160833. Substitute compatibility should be verified for your specific system.
What is the NSN for H160833?
H160833 is cataloged in the U.S. Government catalog under NSN 3110-00-100-5833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H160833

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.