PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H16-1432
H16-1432 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 9.000 INCHES NOMINAL IN, bolt_circle_diameter: 7.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-3104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H16-1432
NSN: 5330-00-361-3104
FSC: 5330
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter9.000 INCHES NOMINAL IN
bolt_circle_diameter7.750 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-361-3104
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H16-1432 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE DIAMETER: 9.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
BOLT CIRCLE DIAMETER: 7.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE DIAMETER9.000 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALPAPER OVERALL
BOLT CIRCLE DIAMETER7.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
N0304 2-442Interchangeable
interchangeable cross-reference
interchangeable
PS1-30-5-B69Interchangeable
interchangeable cross-reference
interchangeable
ASA69Interchangeable
interchangeable cross-reference
interchangeable
182069Interchangeable
interchangeable cross-reference
interchangeable
1146Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H16-1432?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H16-1432?
H16-1432 is a GASKET.
What parts can replace H16-1432?
There are 5 known substitutes for H16-1432: N0304 2-442, PS1-30-5-B69, ASA69 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H16-1432?
H16-1432 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-3104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H16-1432

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026