PartsTable
Technical Data Sheet
Download PDF

H143332 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H143332: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL EXCEPT INSERT, nut_style: HEXAGON, nut_height: 0.257 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), locking_feature: PREVAILING TORQUE ALL NONMETALLIC DESIGN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-257-3229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H143332
NSN: 5310-01-257-3229
FSC: 5310 — Nuts and Washers
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL EXCEPT INSERT
nut_styleHEXAGON
nut_height0.257 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE ALL NONMETALLIC DESIGN
special_featuresLOCKING PATCH NYLON COLOR RED
thread_directionRIGHT-HAND
width_across_flats0.488 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch18
NSN5310-01-257-3229
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H143332 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.488 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL NONMETALLIC DESIGN
•
NUT HEIGHT: 0.257 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.488 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL NONMETALLIC DESIGN
NUT HEIGHT0.257 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
SPECIAL FEATURESLOCKING PATCH NYLON COLOR RED
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH18
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
T32688Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H143332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H143332?
H143332 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace H143332?
There is 1 known substitute for H143332: T32688. Substitute compatibility should be verified for your specific system.
What is the NSN for H143332?
H143332 is cataloged in the U.S. Government catalog under NSN 5310-01-257-3229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H143332