PartsTable
Technical Data Sheet
Download PDF

H1201 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

H1201: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include phase: SINGLE, width: 40.000 INCHES MAXIMUM IN, height: 58.000 INCHES MAXIMUM IN, material: STEEL, fuel_type: MULTIFUEL, cone_width: 0.8125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3158, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H1201
NSN: 3110-00-100-3158
NIINs: 001003158, 003703104, 014391682, 015955576
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
phaseSINGLE
width40.000 INCHES MAXIMUM IN
height58.000 INCHES MAXIMUM IN
materialSTEEL
fuel_typeMULTIFUEL
cone_width0.8125 INCHES NOMINAL IN
current_typeAC
bore_diameter1.1895 INCHES NOMINAL IN
mounting_typeWHEEL
thread_seriesUNIFIED NATIONAL COARSE (UNC)
ignition_methodELECTRODE
fuel_feed_methodINTERNAL PUMP
NSN3110-00-100-3158
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H1201 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.1895 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.1895 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
01845-1069Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2592ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ME88-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
K15118Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1845-1069Reference document
Same NSN cross-reference
Reference document — Secondary reference
119367Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H1201?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H1201?
H1201 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace H1201?
There are 7 known substitutes for H1201: 01845-1069, 2592A, ME88-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H1201?
H1201 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3158. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H1201