PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H11WOR14814
H11WOR14814 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, special_features: COMPOSED OF TWO FLANGED HALVES BOLTED TOGETHER, material_document_and_classification: QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-213-7025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H11WOR14814
NSN: 5330-01-213-7025
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
special_featuresCOMPOSED OF TWO FLANGED HALVES BOLTED TOGETHER
material_document_and_classificationQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-213-7025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H11WOR14814 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURESCOMPOSED OF TWO FLANGED HALVES BOLTED TOGETHER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
300440Interchangeable
interchangeable cross-reference
interchangeable
PLC-12044-17Interchangeable
interchangeable cross-reference
interchangeable
000008EGInterchangeable
interchangeable cross-reference
interchangeable
14195PInterchangeable
Same NIIN cross-reference
interchangeable
RW-105815 PIECE 9Interchangeable
Same NIIN cross-reference
interchangeable
S4700D3.214546 PIECE 9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H11WOR14814?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H11WOR14814?
H11WOR14814 is a RETAINER,PACKING.
What parts can replace H11WOR14814?
There are 6 known substitutes for H11WOR14814: 300440, PLC-12044-17, 000008EG and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H11WOR14814?
H11WOR14814 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-213-7025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H11WOR14814

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026