PartsTable
Technical Data Sheet
Download PDF

H11E — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H11E: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 0.317 INCHES NOMINAL IN, first_leg_length: 0.375 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-783-7173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H11E
NSN: 5340-00-783-7173
NIINs: 007837173, 016898443
FSC: 5340 — Hardware, Commercial
CAGE: 80294 — BOURNS INSTRUMENTS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width0.317 INCHES NOMINAL IN
first_leg_length0.375 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width0.312 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.234 INCHES NOMINAL IN
surface_treatmentPASSIVATE
first_leg_thickness0.016 INCHES NOMINAL IN
second_leg_thickness0.016 INCHES NOMINAL IN
NSN5340-00-783-7173
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H11E MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.093 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG CORNER RADIUS: 0.078 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.312 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.234 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.093 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.125 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.128 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG CORNER RADIUS0.078 INCHES NOMINAL IN
SECOND LEG WIDTH0.312 INCHES NOMINAL IN
SECOND LEG LENGTH1.234 INCHES NOMINAL IN
SECOND LEG SLOT WIDTH0.093 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SUBSTITUTES & CROSS-REFERENCES 1
9172274Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H11E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H11E?
H11E is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace H11E?
There is 1 known substitute for H11E: 9172274. Substitute compatibility should be verified for your specific system.
What is the NSN for H11E?
H11E is cataloged in the U.S. Government catalog under NSN 5340-00-783-7173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H11E

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.