PartsTable
Technical Data Sheet
Download PDF

H114D — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H114D: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1108 OVERALL, nut_style: HEXAGON, nut_height: 0.484 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND, surface_treatment: ZINC AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-057-3097, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H114D
NSN: 5310-01-057-3097
FSC: 5310 — Nuts and Washers
CAGE: 56501 — ABB INSTALLATION PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1108 OVERALL
nut_styleHEXAGON
nut_height0.484 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_across_flats0.875 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeCHAMFERED
thread_pitch_diameters+0.4550 TO 0.4615 INCHES IN
thread_quantity_per_inch13
NSN5310-01-057-3097
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H114D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD PITCH DIAMETERS: +0.4550 TO 0.4615 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.484 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.875 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD PITCH DIAMETERS+0.4550 TO 0.4615 INCHES IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.484 INCHES NOMINAL IN
SURFACE TREATMENTZINC AND CHROMATE OVERALL
NUT STYLEHEXAGON
THREAD QUANTITY PER INCH13
MATERIALSTEEL COMP 1108 OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H114D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H114D?
H114D is a NUT,PLAIN,HEXAGON.
What is the NSN for H114D?
H114D is cataloged in the U.S. Government catalog under NSN 5310-01-057-3097. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H114D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.