H110-1 — NUT,PLAIN,HEXAGON

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

H110-1: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include width: 1.438 INCHES NOMINAL IN, length: 2.154 INCHES NOMINAL IN, material: UNABLE TO DECODE, thread_series: UNF, special_features: SLOTTED MTG HOLES, style_designator: FLUSH LEVER ACTUATOR. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-588-0941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

H110-1

NSN: 5340-00-588-0941
NIINs: 005880941, 015955618
FSC: 5340 — Hardware, Commercial
CAGE: 83014 — HARTWELL CORPORATION (USA)

SPECIFICATIONS

width	1.438 INCHES NOMINAL IN
length	2.154 INCHES NOMINAL IN
material	UNABLE TO DECODE
thread_series	UNF
special_features	SLOTTED MTG HOLES
style_designator	FLUSH LEVER ACTUATOR
nominal_thread_size	0.875 INCHES IN
lever_offset_distance	0.051 INCHES NOMINAL IN
mounting_hole_diameter	0.103 INCHES MINIMUM IN
end_item_identification	2330-01-587-7978;TRAILER,FLAT BED
thread_quantity_per_inch	14
part_name_assigned_by_controlling_agency	NUT
NSN	5340-00-588-0941

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 2.154 INCHES NOMINAL IN

•

LEVER OFFSET DISTANCE: 0.051 INCHES NOMINAL IN

•

STYLE DESIGNATOR: FLUSH LEVER ACTUATOR

•

MOUNTING HOLE DIAMETER: 0.103 INCHES MINIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.122 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN

•

WIDTH: 1.438 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

LENGTH	2.154 INCHES NOMINAL IN
LEVER OFFSET DISTANCE	0.051 INCHES NOMINAL IN
STYLE DESIGNATOR	FLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER	0.103 INCHES MINIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	1.122 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
SPECIAL FEATURES	SLOTTED MTG HOLES
WIDTH	1.438 INCHES NOMINAL IN
MATERIAL	UNABLE TO DECODE

SUBSTITUTES & CROSS-REFERENCES 3

57175Reference document

Same NSN cross-reference

Reference document — Secondary reference

57175AReference document

Same NSN cross-reference

Reference document — Secondary reference

SM-B-314752Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy H110-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is H110-1?

H110-1 is a NUT,PLAIN,HEXAGON.

What parts can replace H110-1?

There are 3 known substitutes for H110-1: 57175, 57175A, SM-B-314752. Substitute compatibility should be verified for your specific system.

What is the NSN for H110-1?

H110-1 is cataloged in the U.S. Government catalog under NSN 5340-00-588-0941. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

H110-1 — NUT,PLAIN,HEXAGON

Request a Quote — H110-1