PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H11-1
H11-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,SENSITIVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, design_type: CLOSED, coil_quantity: 10 1/2, overall_length: 25.313 INCHES NOMINAL IN, inside_diameter: 0.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-379-0093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H11-1
NSN: 5330-00-379-0093
FSC: 5330
CAGE: 80072 — H20 TANK INC U S MOTORS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
design_typeCLOSED
coil_quantity10 1/2
overall_length25.313 INCHES NOMINAL IN
inside_diameter0.281 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length1.500 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
material_hardness_rating42.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM
accommodated_rod_diameter0.250 INCHES NOMINAL IN
cross-sectional_thickness0.063 INCHES NOMINAL IN
NSN5330-00-379-0093
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H11-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALLEST BOLT HOLE DIAMETER: 0.422 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND NONMETALLIC MATERIALS
•
LARGEST BOLT HOLE DIAMETER: 0.469 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
MATERIAL: STEEL AND ASBESTOS OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SMALLEST BOLT HOLE DIAMETER0.422 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND NONMETALLIC MATERIALS
LARGEST BOLT HOLE DIAMETER0.469 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
OVERALL LENGTH25.313 INCHES NOMINAL IN
MATERIALSTEEL AND ASBESTOS OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
C1VV2296AInterchangeable
interchangeable cross-reference
interchangeable
S-345Interchangeable
interchangeable cross-reference
interchangeable
H131Interchangeable
interchangeable cross-reference
interchangeable
100085-13Interchangeable
interchangeable cross-reference
interchangeable
600153PC3Interchangeable
interchangeable cross-reference
interchangeable
H111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H11-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H11-1?
H11-1 is a SWITCH,SENSITIVE.
What parts can replace H11-1?
There are 7 known substitutes for H11-1: C1VV2296A, S-345, H131 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H11-1?
H11-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-379-0093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H11-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026