PartsTable
Technical Data Sheet
Download PDF

H1086 — PISTON,LINEAR ACTUATING CYLINDER

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

H1086: PISTON,LINEAR ACTUATING CYLINDER.

PISTON,LINEAR ACTUATING CYLINDER. Key specifications include material: STEEL OVERALL, bore_style: W/ KEYWAY BOTH ENDS, helix_angle: 4.7665 DEGREES, pitch_diameter: 2.0000 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES, hardness_rating: 60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-834-0335, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H1086
NSN: 3020-00-834-0335
NIINs: 008340335, 013518224
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 71041 — ALTRA INDUSTRIAL MOTION CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_styleW/ KEYWAY BOTH ENDS
helix_angle4.7665 DEGREES
pitch_diameter2.0000 INCHES NOMINAL IN
pressure_angle14.5000 DEGREES
hardness_rating60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
style_designatorHUBLESS
surface_treatmentCADMIUM OVERALL
face_nominal_width2.500 INCHES IN
keyway_nominal_width0.188 INCHES BOTH ENDS IN
thread_form_quantity1
bore_nominal_diameter0.875 INCHES BOTH ENDS IN
NSN3020-00-834-0335
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PISTON,LINEAR ACTUATING CYLINDER TITLE COMPONENT PN H1086 MFR PISTON,LINEAR ACTUATIN
KEY FEATURES
•
THREAD FORM DIRECTION: RIGHT-HAND
•
KEYWAY NOMINAL WIDTH: 0.188 INCHES BOTH ENDS IN
•
BORE NOMINAL DIAMETER: 0.875 INCHES BOTH ENDS IN
•
HELIX ANGLE: 4.7665 DEGREES
•
BORE STYLE: W/ KEYWAY BOTH ENDS
•
HARDNESS RATING: 60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: HUBLESS
•
PITCH DIAMETER: 2.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD FORM DIRECTIONRIGHT-HAND
KEYWAY NOMINAL WIDTH0.188 INCHES BOTH ENDS IN
BORE NOMINAL DIAMETER0.875 INCHES BOTH ENDS IN
HELIX ANGLE4.7665 DEGREES
BORE STYLEW/ KEYWAY BOTH ENDS
HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORHUBLESS
PITCH DIAMETER2.0000 INCHES NOMINAL IN
THREAD FORM QUANTITY1
NOMINAL OUTSIDE DIAMETER2.219 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
WG6RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
932405-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H1086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H1086?
H1086 is a PISTON,LINEAR ACTUATING CYLINDER.
What parts can replace H1086?
There are 2 known substitutes for H1086: WG6R, 932405-1. Substitute compatibility should be verified for your specific system.
What is the NSN for H1086?
H1086 is cataloged in the U.S. Government catalog under NSN 3020-00-834-0335. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H1086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.