PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H104 1-2
H104 1-2 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, outside_diameter: 0.812 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN, operating_pressure: 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-922-5132, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H104 1-2
NSN: 4720-00-922-5132
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
outside_diameter0.812 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
minimum_inside_bending_radius7.000 INCHES IN
layer_composition_and_location1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
NSN4720-00-922-5132
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: H104 1-2 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 0.812 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
•
HYDROSTATIC TEST PRESSURE: 4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OPERATING PRESSURE: 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
INSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER0.812 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
HYDROSTATIC TEST PRESSURE4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OPERATING PRESSURE2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
E708Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-13531Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-13531Interchangeable
interchangeable cross-reference
interchangeable
4218Interchangeable
interchangeable cross-reference
interchangeable
50629Interchangeable
interchangeable cross-reference
interchangeable
12421Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy H104 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H104 1-2?
H104 1-2 is a HOSE,NONMETALLIC.
What parts can replace H104 1-2?
There are 18 known substitutes for H104 1-2: E708, MIL-DTL-13531, MIL-H-13531 and 15 more. Substitute compatibility should be verified for your specific system.
Is H104 1-2 still available?
H104 1-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H104 1-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026