The PRESS,FORCING,HYDRAULIC is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 3442-01-381-6819, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H100-14MD5
NSN:3442-01-381-6819 FSC:3442 — Hydraulic and Pneumatic Presses, Power Driven CAGE:0K4H5 — HYPRESS TECHNOLOGIES INC (USA)
SPECIFICATIONS
Part Number
H100-14MD5
NSN
3442-01-381-6819
COMPONENT DIAGRAM
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 100 TON CAPACITY; FRAME UPRIGHTS 1 1/2 IN. BY 5 IN.; HEAD, BED RAILS, 15 IN. CHANNEL; BASE MEMBERS 5 IN. CHANNEL; WIDTH BETWEEN UPRIGHTS 48 IN.; WIDTH BETWEEN TABLE RAILS 15 IN.; TABLE TRAVEL 30 IN.; MAXIMUM VERTICAL CLEARANCE 36 1/2 IN.; BED SUPPORT PINS 2 IN. DIAMETER; BED SUPPORT PINS 2 EACH; INSIDE UPRIGHTS 12 IN.; RAM TRAVEL 14 IN.; RAM DIAMETER 3 1/4 IN.; CYLINDER BORE 6 IN. DIAMETER; TABLE SPACING INCREMENTS 6 IN.; LENGTH 87 IN.; WIDTH 48 IN.; HEIGHT 99 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 31 IN.; SHIPPING WEIGHT 2858 POUNDS; 220/440 VOLT; THREE PHASE; 60 CYCLE; 5 HORSEPOWER; NO LOAD CAPACITY 7.5 IN. PER MINUTE; HALF CAPACITY 6.4 IN. PER MINUTE; FULL CAPACITY 5.3 IN. PER MINUTE; MAGNETIC STARTER LBS
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTION
100 TON CAPACITY; FRAME UPRIGHTS 1 1/2 IN. BY 5 IN.; HEAD, BED RAILS, 15 IN. CHANNEL; BASE MEMBERS 5 IN. CHANNEL; WIDTH BETWEEN UPRIGHTS 48 IN.; WIDTH BETWEEN TABLE RAILS 15 IN.; TABLE TRAVEL 30 IN.; MAXIMUM VERTICAL CLEARANCE 36 1/2 IN.; BED SUPPORT PINS 2 IN. DIAMETER; BED SUPPORT PINS 2 EACH; INSIDE UPRIGHTS 12 IN.; RAM TRAVEL 14 IN.; RAM DIAMETER 3 1/4 IN.; CYLINDER BORE 6 IN. DIAMETER; TABLE SPACING INCREMENTS 6 IN.; LENGTH 87 IN.; WIDTH 48 IN.; HEIGHT 99 IN.; LEFT TO RIGHT CYLINDER MOVEMENT 31 IN.; SHIPPING WEIGHT 2858 POUNDS; 220/440 VOLT; THREE PHASE; 60 CYCLE; 5 HORSEPOWER; NO LOAD CAPACITY 7.5 IN. PER MINUTE; HALF CAPACITY 6.4 IN. PER MINUTE; FULL CAPACITY 5.3 IN. PER MINUTE; MAGNETIC STARTER LBS
SPECIAL FEATURES
DIRECT COUPLED PUMP FLANGE MOTORS; MOVABLE CYLINDER GIVING MORE SIDE MOVEMENT OF THE RAM SINCE THE CYLINDER DOES NOT HOUSE THE PUMP AND MOTOR; ADJUSTABLE RELIEF VALVE; TABLE IS ADJUSTABLE WITH SELF-LOCKING TABLE WINCH; EQUIPPED WITH SAFETY DEVICES TO PREVENT OVER EXTENSION OF THE RAM, AND OVER CAPACITY OF THE PRESS
OTHER ITEMS IN FSC 3442 — Hydraulic and Pneumatic Presses, Power Driven
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H100-14MD5?
H100-14MD5 is a PRESS,FORCING,HYDRAULIC.
What parts can replace H100-14MD5?
There is 1 known substitute for H100-14MD5: PRESSCVC. Substitute compatibility should be verified for your specific system.
What is the NSN for H100-14MD5?
H100-14MD5 is cataloged in the U.S. Government catalog under NSN 3442-01-381-6819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.