PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H1-EC12-12NJ-12NJ-46
H1-EC12-12NJ-12NJ-46 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.750 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-139-1791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H1-EC12-12NJ-12NJ-46
NSN: 4720-01-139-1791
FSC: 4720
CAGE: 09505 — DAYCO INDUSTRIAL (CAN)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.750 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.062 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-139-1791
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: H1-EC12-12NJ-12NJ-46 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
INSIDE SURFACE CONDITION: SMOOTH
•
THREAD SERIES DESIGNATOR: UN FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND WEATHERPROOF
•
INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
MINIMUM INSIDE BENDING RADIUS9.500 INCHES IN
INSIDE SURFACE CONDITIONSMOOTH
THREAD SERIES DESIGNATORUN FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
INSIDE DIAMETER0.750 INCHES NOMINAL IN
OPERATING PRESSURE2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
SEAT ANGLE37.0 DEGREES FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
173106ASInterchangeable
interchangeable cross-reference
interchangeable
74191ASInterchangeable
interchangeable cross-reference
interchangeable
51809Interchangeable
interchangeable cross-reference
interchangeable
MILC4551Interchangeable
interchangeable cross-reference
interchangeable
AA50797-C-H-2-AInterchangeable
interchangeable cross-reference
interchangeable
A-A-50797 GPC TYII CL2 STAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H1-EC12-12NJ-12NJ-46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H1-EC12-12NJ-12NJ-46?
H1-EC12-12NJ-12NJ-46 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace H1-EC12-12NJ-12NJ-46?
There are 9 known substitutes for H1-EC12-12NJ-12NJ-46: 173106AS, 74191AS, 51809 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H1-EC12-12NJ-12NJ-46?
H1-EC12-12NJ-12NJ-46 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-139-1791. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H1-EC12-12NJ-12NJ-46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026