PartsTable
Technical Data Sheet
Download PDF

H044-4-28 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

H044-4-28: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.740 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-293-9548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H044-4-28
NSN: 5305-01-293-9548
FSC: 5305 — Screws
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.740 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES GRIP
fastener_length2.105 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5305-01-293-9548
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: H044-4-28 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 2.105 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS-672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
FASTENER LENGTH2.105 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS-672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 6
PBF1165-4-28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C7984-4-28Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
VT1693F4-28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5305PL0784874Reference document
Same NSN cross-reference
Reference document — Informative reference only
121557-4-A28PSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5305PL1686182Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H044-4-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H044-4-28?
H044-4-28 is a SCREW,CLOSE TOLERANCE.
What parts can replace H044-4-28?
There are 6 known substitutes for H044-4-28: PBF1165-4-28, C7984-4-28, VT1693F4-28 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H044-4-28?
H044-4-28 is cataloged in the U.S. Government catalog under NSN 5305-01-293-9548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H044-4-28

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.