PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H-715334
H-715334 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.8125 INCHES NOMINAL IN, bore_diameter: 2.4375 INCHES NOMINAL IN, special_features: DUTY CLASS H SERIES, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-969-7315, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H-715334
NSN: 3110-00-969-7315
FSC: 3110
CAGE: 93799 — MERITOR HEAVY VEHICLE SYSTEMS LLC TRUCK AXLE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.8125 INCHES NOMINAL IN
bore_diameter2.4375 INCHES NOMINAL IN
special_featuresDUTY CLASS H SERIES
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
end_item_identificationCARRIERS FOR 180 SERIES SINGLE AXLES AND REARS OF 180 SERIES TANDEM AXLES
standard_tolerance_designationAFBMA CLASS 2
part_name_assigned_by_controlling_agencyCONE-DRIVE PINION OUTER BEARING
NSN3110-00-969-7315
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H-715334 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 2.4375 INCHES NOMINAL IN
•
CONE WIDTH: 1.8125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
BORE DIAMETER2.4375 INCHES NOMINAL IN
CONE WIDTH1.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
SPECIAL FEATURESDUTY CLASS H SERIES
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
79482Interchangeable
interchangeable cross-reference
interchangeable
30145Interchangeable
interchangeable cross-reference
interchangeable
H-715334Interchangeable
interchangeable cross-reference
interchangeable
879767R91Interchangeable
Same NIIN cross-reference
interchangeable
865169Interchangeable
Same NIIN cross-reference
interchangeable
31SP34Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy H-715334?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H-715334?
H-715334 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace H-715334?
There are 7 known substitutes for H-715334: 79482, 30145, H-715334 and 4 more. Substitute compatibility should be verified for your specific system.
Is H-715334 still available?
H-715334 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H-715334

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026