PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H-480
H-480 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: 1-1/2 IN. SIZE IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H-480
NSN: 3110-00-227-3238
FSC: 3110
CAGE: 08302 — PACCAR WINCH INC DBA PACCAR WINCH DIVISION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter0.8750 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_features1-1/2 IN. SIZE IN
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
end_item_identificationREFRIGERANT UNIT, P/N 1917-01 ABOARD 420 FT WAGB COAST GUARD VESSELS FT
overall_outside_diameter1.3750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
general_characteristics_item_descriptionCORE FOR REFRIGERANT DRIER
NSN3110-00-227-3238
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H-480 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL ROLLER
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE AND OIL GROOVE IN OUTER RING
ALIGNMENT TYPERIGID
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL ROLLER
MATERIALSTEEL OR COPPER ALLOY RETAINER
SURFACE FINISHGROUND
MATERIALSTEEL OUTER RING
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
BORE DIAMETER0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
753-0253-000Interchangeable
interchangeable cross-reference
interchangeable
580R046H01Interchangeable
interchangeable cross-reference
interchangeable
150 17Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
13317Interchangeable
interchangeable cross-reference
interchangeable
25A7571PC2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy H-480?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H-480?
H-480 is a BEARING,ROLLER,NEEDLE.
What parts can replace H-480?
There are 19 known substitutes for H-480: 753-0253-000, 580R046H01, 150 17 and 16 more. Substitute compatibility should be verified for your specific system.
Is H-480 still available?
H-480 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H-480

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026