PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H-250
H-250 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HEATER,DUCT TYPE,PORTABLE is a the manufacturer industrial component. Key specifications include depth: 43.000 INCHES NOMINAL IN, width: 36.000 INCHES NOMINAL IN, height: 46.000 INCHES NOMINAL IN, material: STEEL OVERALL, fuel_type: GASOLINE, power_source: SOUND POWERED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-187-9035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H-250
NSN: 5340-00-187-9035
FSC: 5340
CAGE: 03743 — EGS ELECTRICAL GROUP APPLETON DIV (USA)
SPECIFICATIONS
depth43.000 INCHES NOMINAL IN
width36.000 INCHES NOMINAL IN
height46.000 INCHES NOMINAL IN
materialSTEEL OVERALL
quantity1
fuel_typeGASOLINE
power_sourceSOUND POWERED
mounting_typeWHEEL
ignition_methodPILOT
outlet_positionIN THE SAME DIRECTION
fuel_feed_methodGRAVITY
heat_medium_typeAIR
NSN5340-00-187-9035
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H-250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 2.688 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION2.688 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
H250Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-11049Interchangeable
interchangeable cross-reference
interchangeable
M600I234Interchangeable
interchangeable cross-reference
interchangeable
R212Interchangeable
interchangeable cross-reference
interchangeable
TV3LInterchangeable
interchangeable cross-reference
interchangeable
HSL3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H-250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H-250?
H-250 is a HEATER,DUCT TYPE,PORTABLE.
What parts can replace H-250?
There are 8 known substitutes for H-250: H250, MIL-H-11049, M600I234 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H-250?
H-250 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-187-9035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H-250

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026