GW10F7B — WASHER,RECESSED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

GW10F7B: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM, recess_diameter: 0.498 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, outside_diameter: 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-151-5426, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

GW10F7B

NSN: 5310-00-151-5426
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 4130 OVERALL
recess_angle	90.0 DEGREES NOMINAL
hole_diameter	0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
hardness_rating	33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM
recess_diameter	0.498 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
outside_diameter	0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
special_features	OD ON RECESSED SIDE CHAMFERED 45 DEG BY 0.030 IN. MIN,0.040 IN. MAX IN
style_designator	RECESSED
surface_treatment	CADMIUM AND CHROMATE OVERALL
material_thickness	0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
minimum_tensile_strength	150000 POUNDS PER SQUARE INCH LBS
material_document_and_classification	MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-00-151-5426

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM

•

STYLE DESIGNATOR: RECESSED

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN

•

RECESS DIAMETER: 0.498 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM
STYLE DESIGNATOR	RECESSED
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
RECESS DIAMETER	0.498 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
SPECIAL FEATURES	OD ON RECESSED SIDE CHAMFERED 45 DEG BY 0.030 IN. MIN,0.040 IN. MAX IN
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy GW10F7B?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is GW10F7B?

GW10F7B is a WASHER,RECESSED.

What is the NSN for GW10F7B?

GW10F7B is cataloged in the U.S. Government catalog under NSN 5310-00-151-5426. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

GW10F7B — WASHER,RECESSED

Request a Quote — GW10F7B