PartsTable
Technical Data Sheet
Download PDF

GW 1188 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

GW 1188: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, hole_diameter: 0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN, overall_diameter: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-553-7816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GW 1188
NSN: 5310-01-553-7816
FSC: 5310 — Nuts and Washers
CAGE: 60240 — GENTEX CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
hole_diameter0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
overall_diameter0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification4920-01-552-6912
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyWASHER,FLAT
NSN5310-01-553-7816
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GW 1188 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER,FLAT
END ITEM IDENTIFICATION4920-01-552-6912
MATERIALSTEEL CORROSION RESISTING OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
G006-2310 ITEM 45Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GW 1188?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GW 1188?
GW 1188 is a WASHER,FLAT.
What parts can replace GW 1188?
There is 1 known substitute for GW 1188: G006-2310 ITEM 45. Substitute compatibility should be verified for your specific system.
What is the NSN for GW 1188?
GW 1188 is cataloged in the U.S. Government catalog under NSN 5310-01-553-7816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GW 1188