PartsTable
Technical Data Sheet
Download PDF

GW 1185-02 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

GW 1185-02: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.152 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.498 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN, thread_length: 1.000 INCHES NOMINAL IN, screw_material: ALUMINUM ALLOY OR STEEL CORROSION RESISTING. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-553-7607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GW 1185-02
NSN: 5305-01-553-7607
FSC: 5305 — Screws
CAGE: 60240 — GENTEX CORP (USA)
SPECIFICATIONS
head_styleBINDING
head_height0.152 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.498 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
thread_length1.000 INCHES NOMINAL IN
screw_materialALUMINUM ALLOY OR STEEL CORROSION RESISTING
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
end_item_identification4920-01-552-6912
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
NSN5305-01-553-7607
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GW 1185-02 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.152 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: ALUMINUM ALLOY OR STEEL CORROSION RESISTING
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.152 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALALUMINUM ALLOY OR STEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW,BINDING HEAD
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
G006-1203 ITEM 1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GW 1185-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GW 1185-02?
GW 1185-02 is a SCREW,MACHINE.
What parts can replace GW 1185-02?
There is 1 known substitute for GW 1185-02: G006-1203 ITEM 1. Substitute compatibility should be verified for your specific system.
What is the NSN for GW 1185-02?
GW 1185-02 is cataloged in the U.S. Government catalog under NSN 5305-01-553-7607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GW 1185-02