PartsTable
Technical Data Sheet
Download PDF

GV51-807PC8 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GV51-807PC8: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, outside_diameter: 1.125 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.937 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN, surface_treatment: LEAD ALLOY OVERALL, cross-sectional_thickness: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-573-1420, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GV51-807PC8
NSN: 5330-00-573-1420
FSC: 5330 — Packing and Gasket Materials
CAGE: 04845 — AUTOMATIC SWITCH COMPANY DBA ASCO (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
outside_diameter1.125 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.937 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
surface_treatmentLEAD ALLOY OVERALL
cross-sectional_thickness0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
cross-sectional_shape_styleRECTANGULAR METAL
material_document_and_classificationQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-573-1420
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GV51-807PC8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.937 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
•
SURFACE TREATMENT: LEAD ALLOY OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
APERTURE DIAMETER0.937 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
SURFACE TREATMENTLEAD ALLOY OVERALL
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
AV37-096PC8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GV51-807PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GV51-807PC8?
GV51-807PC8 is a GASKET.
What parts can replace GV51-807PC8?
There is 1 known substitute for GV51-807PC8: AV37-096PC8. Substitute compatibility should be verified for your specific system.
What is the NSN for GV51-807PC8?
GV51-807PC8 is cataloged in the U.S. Government catalog under NSN 5330-00-573-1420. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GV51-807PC8