GTR64-10C — CLAMP,CABLE,ELECTRICAL CONNECTOR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

GTR64-10C: CLAMP,CABLE,ELECTRICAL CONNECTOR.

CLAMP,CABLE,ELECTRICAL CONNECTOR. Key specifications include material: ALUMINUM LOCATION NOT OTHERWISE SPECIFIED, overall_width: 0.85 INCHES MAXIMUM IN, style_designator: CLAMP, ANGLE TIE STRAP TYPE, body_angle_in_deg: 45.0, surface_treatment: ANODIZE, specification/standard_data: 81349-MIL-C-85049/57 GOVERNMENT SPECIFICATION. This part is cataloged in the U.S.

Government catalog under NSN 5935-01-291-0816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

GTR64-10C

NSN: 5935-01-291-0816
FSC: 5935 — Connectors, Electrical
CAGE: 06324 — GLENAIR, INC. (USA)

SPECIFICATIONS

material	ALUMINUM LOCATION NOT OTHERWISE SPECIFIED
overall_width	0.85 INCHES MAXIMUM IN
style_designator	CLAMP, ANGLE TIE STRAP TYPE
body_angle_in_deg	45.0
surface_treatment	ANODIZE
cable_opening_quantity	1
specification/standard_data	81349-MIL-C-85049/57 GOVERNMENT SPECIFICATION
mounting_facility_type_and_quantity	1 NUT(S)
distance_from_centerline_to_cable_end	0.88 INCHES MAXIMUM IN
distance_from_centerline_to_connector_end	1.25 INCHES MAXIMUM IN
NSN	5935-01-291-0816

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 1 NUT(S)

•

DISTANCE FROM CENTERLINE TO CABLE END: 0.88 INCHES MAXIMUM IN

•

BODY ANGLE IN DEG: 45.0

•

DISTANCE FROM CENTERLINE TO CONNECTOR END: 1.25 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: CLAMP, ANGLE TIE STRAP TYPE

•

SPECIFICATION/STANDARD DATA: 81349-MIL-C-85049/57 GOVERNMENT SPECIFICATION

•

CABLE OPENING QUANTITY: 1

TYPICAL APPLICATIONS

Server Internal Cabling
Data Center Cable Infrastructure
SAS/SATA Drive Connectivity

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	1 NUT(S)
DISTANCE FROM CENTERLINE TO CABLE END	0.88 INCHES MAXIMUM IN
BODY ANGLE IN DEG	45.0
DISTANCE FROM CENTERLINE TO CONNECTOR END	1.25 INCHES MAXIMUM IN
STYLE DESIGNATOR	CLAMP, ANGLE TIE STRAP TYPE
OVERALL WIDTH	0.85 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA	81349-MIL-C-85049/57 GOVERNMENT SPECIFICATION
CABLE OPENING QUANTITY	1
SURFACE TREATMENT	ANODIZE
TEST DATA DOCUMENT	81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

SUBSTITUTES & CROSS-REFERENCES 3

M85049/57-10AReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-C-85049/57Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS85049/57Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy GTR64-10C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is GTR64-10C?

GTR64-10C is a CLAMP,CABLE,ELECTRICAL CONNECTOR.

What parts can replace GTR64-10C?

There are 3 known substitutes for GTR64-10C: M85049/57-10A, MIL-C-85049/57, SAE-AS85049/57. Substitute compatibility should be verified for your specific system.

What is the NSN for GTR64-10C?

GTR64-10C is cataloged in the U.S. Government catalog under NSN 5935-01-291-0816. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

GTR64-10C — CLAMP,CABLE,ELECTRICAL CONNECTOR

Request a Quote — GTR64-10C