PartsTable
Technical Data Sheet
Download PDF

GT36 — CLAMP,HOSE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GT36: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 14.500 INCHES NOMINAL IN, inside_diameter: 2.250 INCHES NOMINAL IN, style_designator: BAND. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-378-2000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GT36
NSN: 5330-00-378-2000
NIINs: 003782000, 004894738
FSC: 5330 — Packing and Gasket Materials
CAGE: 70876 — BATH IRON WORKS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.625 INCHES NOMINAL IN
overall_length14.500 INCHES NOMINAL IN
inside_diameter2.250 INCHES NOMINAL IN
style_designatorBAND
surface_treatmentPASSIVATE OVERALL
cross-sectional_thickness0.063 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-378-2000
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GT36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: ASBESTOS OVERALL
•
HOLE DIAMETER: 0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
OVERALL LENGTH14.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH12.563 INCHES NOMINAL IN
MATERIALASBESTOS OVERALL
HOLE DIAMETER0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
M36556ALT1PC271Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy GT36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GT36?
GT36 is a CLAMP,HOSE.
What parts can replace GT36?
There is 1 known substitute for GT36: M36556ALT1PC271. Substitute compatibility should be verified for your specific system.
What is the NSN for GT36?
GT36 is cataloged in the U.S. Government catalog under NSN 5330-00-378-2000. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GT36

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.