GT30: BEARING,BALL,THRUST.
The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL BALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.312 INCHES NOMINAL IN, alignment_type: RIGID, overall_height: 0.8125 INCHES NOMINAL IN, surface_finish: GROUND. This part is cataloged in the U.S.
Government catalog under NSN 5310-00-099-8901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL BALL |
| thickness | 0.062 INCHES NOMINAL IN |
| hole_diameter | 0.312 INCHES NOMINAL IN |
| alignment_type | RIGID |
| overall_height | 0.8125 INCHES NOMINAL IN |
| surface_finish | GROUND |
| hardness_rating | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM |
| overall_diameter | 0.625 INCHES NOMINAL IN |
| style_designator | GROOVED RACE SURFACE |
| bore_smallest_diameter | 2.3125 INCHES NOMINAL IN |
| peripheral_shape_style | ROUND |
| center_hole_shape_style | ROUND |
| NSN | 5310-00-099-8901 |
| OVERALL DIAMETER | 0.625 INCHES NOMINAL IN |
| HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 417,GR RS515F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH LBS |
| PERIPHERAL SHAPE STYLE | ROUND |
| MATERIAL | RUBBER SYNTHETIC OVERALL |
| CENTER HOLE SHAPE STYLE | ROUND |
| HOLE DIAMETER | 0.312 INCHES NOMINAL IN |
| THICKNESS | 0.062 INCHES NOMINAL IN |