PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GT24
GT24 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: STEEL CORROSION RESISTING OVERALL, alignment_type: RIGID, overall_height: 0.8125 INCHES NOMINAL IN, surface_finish: GROUND, inside_diameter: 1.437 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN, style_designator: BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GT24
NSN: 3110-00-156-1757
FSC: 3110
CAGE: 03489 — ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
alignment_typeRIGID
overall_height0.8125 INCHES NOMINAL IN
surface_finishGROUND
inside_diameter1.437 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
style_designatorBAND
surface_treatmentPASSIVATE OVERALL
bore_smallest_diameter1.9375 INCHES NOMINAL IN
overall_outside_diameter3.2188 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.1
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1757
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: GT24 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
BORE SMALLEST DIAMETER: 1.9375 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
OVERALL OUTSIDE DIAMETER: 3.2188 INCHES NOMINAL IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
MATERIAL: STEEL BALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.8125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STYLE DESIGNATORGROOVED RACE SURFACE
BORE SMALLEST DIAMETER1.9375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL OUTSIDE DIAMETER3.2188 INCHES NOMINAL IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
MATERIALSTEEL BALL
MATERIALSTEEL WASHER
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
CA310Interchangeable
interchangeable cross-reference
interchangeable
F-24Interchangeable
interchangeable cross-reference
interchangeable
C12233-7Interchangeable
interchangeable cross-reference
interchangeable
GT24Interchangeable
interchangeable cross-reference
interchangeable
FBSS60Interchangeable
interchangeable cross-reference
interchangeable
A-2224Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GT24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GT24?
GT24 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace GT24?
There are 21 known substitutes for GT24: CA310, F-24, C12233-7 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GT24?
GT24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GT24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026