PartsTable
Technical Data Sheet
Download PDF

GT11D-1 — ROD END,THREADED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GT11D-1: ROD END,THREADED.

The ROD END,THREADED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 AND ALUMINUM ALLOY 2024 OVERALL, thread_class: 3B OVERALL, thread_length: 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM ROD CONNECTION IN, overall_length: 2.093 INCHES MINIMUM AND 2.113 INCHES MAXIMUM IN, special_features: TEST DATA DOCUMENT,MIL-I-6866,ADDITIONAL, thread_direction: RIGHT-HAND OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-414-8438, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GT11D-1
NSN: 5340-00-414-8438
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 AND ALUMINUM ALLOY 2024 OVERALL
thread_class3B OVERALL
thread_length0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM ROD CONNECTION IN
overall_length2.093 INCHES MINIMUM AND 2.113 INCHES MAXIMUM IN
special_featuresTEST DATA DOCUMENT,MIL-I-6866,ADDITIONAL
thread_directionRIGHT-HAND OVERALL
surface_treatmentANODIZE OVERALL
nominal_thread_size0.375 INCHES ROD CONNECTION IN
thread_pitch_diameters+0.3479 TO 0.3516 INCHES OVERALL IN
thread_series_designatorUNF ROD CONNECTION
unthreaded_end_outside_diameter0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-200/2,T6 AND T4 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-225/4,T6 AND T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-414-8438
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GT11D-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNTHREADED END OUTSIDE DIAMETER: 0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: GSS9030,IGLOO CORP,TEXAS-TENNESSEE INDUSTRIES MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM ROD CONNECTION IN
•
THREAD PITCH DIAMETERS: +0.3479 TO 0.3516 INCHES OVERALL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/2,T6 AND T4 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-225/4,T6 AND T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND OVERALL
•
NOMINAL THREAD SIZE: 0.375 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
UNTHREADED END OUTSIDE DIAMETER0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONGSS9030,IGLOO CORP,TEXAS-TENNESSEE INDUSTRIES MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM ROD CONNECTION IN
THREAD PITCH DIAMETERS+0.3479 TO 0.3516 INCHES OVERALL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2,T6 AND T4 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-225/4,T6 AND T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.093 INCHES MINIMUM AND 2.113 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND OVERALL
NOMINAL THREAD SIZE0.375 INCHES ROD CONNECTION IN
SPECIAL FEATURESTEST DATA DOCUMENT,MIL-I-6866,ADDITIONAL
SURFACE TREATMENTANODIZE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GT11D-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GT11D-1?
GT11D-1 is a ROD END,THREADED.
What is the NSN for GT11D-1?
GT11D-1 is cataloged in the U.S. Government catalog under NSN 5340-00-414-8438. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GT11D-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.