PartsTable
Technical Data Sheet
Download PDF

GS590AW9L — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GS590AW9L: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL, mounting_method: THREADED HOLE(S), side_for_which_designed: LEFT HAND, material_document_and_classification: QQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-291-0923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GS590AW9L
NSN: 5340-01-291-0923
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
materialALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL
mounting_methodTHREADED HOLE(S)
side_for_which_designedLEFT HAND
material_document_and_classificationQQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-01-291-0923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GS590AW9L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: THREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
WIDTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL
•
SIDE FOR WHICH DESIGNED: LEFT HAND
TECHNICAL CHARACTERISTICS
MOUNTING METHODTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL
SIDE FOR WHICH DESIGNEDLEFT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GS590AW9L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS590AW9L?
GS590AW9L is a SLIDE,DRAWER,EXTENSION.
What is the NSN for GS590AW9L?
GS590AW9L is cataloged in the U.S. Government catalog under NSN 5340-01-291-0923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GS590AW9L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.